SAW FILES PRODUCTS

Heavy Taper Saw Files

American pattern
Cut 2:Second
Can be used to  finishing, deburring and sharpening .
Equilateral triangular cross section
Hardness≥60HRC

Article No. Length Cut No PCS/CTN Dimensions
(mm)
GW.(KG)
0221-100-2 100mm 4 2 300 320x160x85 9
0221-125-2 125mm 5 2 300 390x205x100 15
0221-150-2 150mm 6 2 300 390x220x100 20
0221-175-2 175mm 7 2 120 260x195x100 11
0221-200-2 200mm 8 2 120 260x205x100 14

Regular Taper Saw Files

American pattern
Cut 2:Second
Can be used to  finishing, deburring and sharpening .
Equilateral triangular cross section
Hardness≥60HRC

Article No. Length Cut No PCS/CTN Dimensions
(mm)
GW.(KG)
0221-100-2 100mm 4 2 300 320x160x85 9
0221-125-2 125mm 5 2 300 390x205x100 15
0221-150-2 150mm 6 2 300 390x220x100 20
0221-175-2 175mm 7 2 120 260x195x100 11
0221-200-2 200mm 8 2 120 275x205x100 14

Slim Taper Saw Files

American pattern
Cut 2:Second
Can be used to  finishing, deburring and sharpening .
Equilateral triangular cross section
Hardness≥60HRC

Advantages of PL saw files

  • All the steel saw flat files from PL are made of high carbon steel-T12 which we buy from the biggest steel factory in China. Each batch of the steel comes with a qualified datasheet, that means it is traceable. So the quality of the raw material can be guaranteed, and in this way, we keep the quality of all our files from the very start. Besides that, we will run a small test of each batch steel in our own lab to make it double safe. And this is very important for the hardness of each steel file and rasp to reach 60HRC.
  • The teeth are made by PC controlled machine automatically, so the space between each tooth is the same, and all of them have the same height, and that will give the files a flat and even surface.
  • If you need your own logo to be on the saw files, we have laser logo machine to do it for you.
  • If you need your own package to pack the files, we have our own designer to help with that .
  • If you have the technical problem, we have a team of engineers who have been in our factory for almost a decades, they can discuss with you and solve all your hesitations.

Where can the saw files be used?

It is mainly used for sharpening the hand saws, band saws, circular saws etc, besides that since it is similar to triangular files, so it can also be used to enlarge internal trianglar holes .